| Sign In | Join Free | My burrillandco.com |
|
1 Years
| Ask Lasest Price | |
| Brand Name : | RELIGHT |
| Certification : | CE,ETL,UL |
| Model Number : | 1020 |
| Price : | Contact us to get best price |
| Delivery Time : | 2-3weeks |
| Payment Terms : | T/T |
| Supply Ability : | 10000M/M |
1020 Double-Sided Emitting Neon Strip
Features:
Technologies: ON/OFF,SPI
Application:
This product is suitable for outdoor lighting, decorative lighting in buildings, hotels, shopping malls, etc.
Product Description
| LED | CCT(K) | CRI | LEDs/m | LEDs/m | Vf. (v.) | Current (mA/m) | Power (W/m) | Cut Length(MM) | Max Run (M) |
| 2835 | 2700K | 80/90 | 140 | 450 | 24V | 417 | 10 | 50 | 5 |
| 3000K | 450 | ||||||||
| 4000K | 470 | ||||||||
| 5700K | 470 | ||||||||
| 5050RGB | R:620-625nm | 80/90 | 84 | 240 | 24V | 417 | 10 | 50 | 5 |
| G:520-530nm | |||||||||
| B:465-467nm | |||||||||
| W:2700-6500K |
Other Specifications
| Protection grade | IP67 |
| Working temperature(°C) | -25~+60 |
| Storage environment temperature (°C) | -25~+70 |
| Standard length | 5 |
| Maximum cascade length(m) | 5 |
| weight | / |
Remark
The test environment temperature is 25±2°C;
The above data are typical values, the actual parameters of the product may be different from the typical data; the data is subject to change without notice;
The above "/" means that this parameter is not required for the time being.
Common product faults and their troubleshooting methods
| Fault Phenomena | Possible Causes | Troubleshooting Methods |
| All lights off | 1.Mains power failure | Power on |
| 2.0pen circuit or short circuit at switching power supplyoutput triggering auto-protection | Troubleshoot and restore power | |
| 3.Reverse polarity at LED strip power input | Check wire connection status to ensure correct polarity | |
| Partial lights off | 1.Partial switching power supply failure | Inspect power supply system and resolve faults |
| 2.Wiring error in partial LED strip circuits | ||
| 3.Reverse polarity in partial LED strips | Correct wiring | |
| LED uneven brightnessor insufficient brightness | 1.Power supply overload | Replace with higher-power supply according to load |
| 2.Excessive line loss in switching power circuits orsignificant line loss discrepancies | Maintain LED strip operating voltage within +5% of rated voltage 1. Shorten power cable length between power supply and LEDstrip or use larger gauge wires; 2. Ensure number of LED strips per circuit ≤ max allowed cascadingquantity and keep cascading quantities similar per circuit). | |
| 3.Excessive serial connection of LED strips | Adjust LED strip quantity per power branch to meet maxallowed cascading requirements per circuit | |
| LED flickering | 1.Poor contact at connection points | Identify and resolve poor contact points |
| 2.Switching power supply malfunction | Replace switching power supply |
- If the external flexible cable of this product is damaged, the
cable must be replaced by the manufacturer or similarly qualified
personnel to prevent hazards.
- For specific installation arrangements and precautions, refer to
the product user manual.
- Data in this specification is based on standard products, Actual
delivered products may vary, subject to physical measurements.
- All product diagrams in this specifcation are schematic diagrams,
Actual delivered products may differ, subject to physical obiects
- Technical modifications may be implemented without prior notice.
- Shenzhen Meishang Lighting Co., Ltd. reserves the final
interpretation rights of this manual.
|
|
